Description
Amplifier Pride Quattro Plus
In range of Pride Car Audio brand equipment you can find an amplifier Pride Quattro Plus. It is available on the US market now!
It is a 4-channel AB class amplifier, ideal for powering a speakerphone.
Pride Quattro plus Stably operates on a load of 2 ohms per channel, or 4 ohms in the “bridge switching mode” of the channels.
The power of each of the four channels is 100 W for a load of 4 Ohms or 140 W for a load of 2 Ohms, at a voltage of 14.4 volts and K.N.I. 1%
Range of reproduced frequencies, Hz 15 – 30000
RMS rated power of 2 ohms, number of channels x W 4 x 140
RMS rated power of 4 ohms, number of channels x W 4 x 100
RMS rated power at 4 ohms, bridge, W 2 x 280
You can install a quality solution for Your car and connect 4 channel speakers or Twitters. It is possible to work in 2 Ohms.
Buy it now and enjoy the power of sound by Pride Car Audio!
Part number: Q.125PLUS
| Technical feature | |
|---|---|
| 2 Ohm Power | 140 W x 4 |
| 4 Ohm Power | 100 W x 4 |
| 4 Ohm Power Mono | 280 W x 2 |
| Frequency Response | 15 Hz - 30 KHz |
| Signal to Noise | 100 dB |
| Efficiency @ 4ohm | Over 65% |
| Damping Factor | > 200 |
| Input Sensitivity | 8V-0,3V |
| High Pass Filter | 20 Hz - 8 KHz |
| Low Pass Filter | 50 Hz - 8 KHz |
| Strap Connection | No |
| Fuse Rating | 80 A (2 x 40А) |
| Physical feature | |
| Length | 400 mm/15,7" |
| Height | 53 mm/2" |
| Width | 220 mm/8,6" |
| Color | Black |